Fuel Injector Bosch 0280150400

Price:	$44.99
Sale Price:	No Price
Availability:	in stock
Prod. Code:	MM 0280150400-1

This Is a MotorCraft Brand Fuel Injector. This injector is the same as Bosch 0280150400.

Bosch Performance Fuel Injectors
Part Number	OHMs	LB/HR @ 43.5 PSI	Connector	Nozzle Type

E0SE-A2A

2.3

EV1

Pintle

Fuel Injector Information:

This fuel injector can be used as an upgrade for many low ohm applications I can rebuild these units to fit most of the barbed top or hose type fuel injectors and put the correct needed parts onto the bottom of the unit. Or I can fit them with the standard 14MM O'rings on the top, And install the spacer ring O'ring and a pintle cap on the bottom of the fuel injectors like a normal standard Bosch Injector uses.

BORGWARNER # 57002

Bosch Injector Casting Number:

0280150400

0280 150 400

0280-150-400

MotorCraft Injector Casting Number:

E0SE-A1A

E0SE-A2A

E0SE-AA

Engineering Numbers:

E0SE 9F593 AA E0SE-9F593-AA

E0SE 9F593 A1A E0SE-9F593-A1A

CM3355 CM 3355 CM-3355

Applications:

FORD	*1985-84*	*CROWN VICTORIA*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
FORD	*1985-84*	*LTD*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
FORD	*1985-84*	*MUSTANG*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
FORD	*1985-84*	*THUNDERBIRD*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
LINCOLN	*1980*	*CONTINENTAL*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
LINCOLN	*1985-83*	*CONTINENTAL*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
LINCOLN	*1985-80*	*MARK SERIES*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
LINCOLN	*1985-82*	*TOWN CAR*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
MERCURY	*1985-84*	*CAPRI*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
MERCURY	*1985-83*	*COUGAR*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
MERCURY	*1985-83*	*GRAND MARQUIS*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*
MERCURY	*1985-81*	*MARQUIS*	*5.0 LTR [302"]*	*8 Cyl.*	*MM 0280150400*

I can build these CFI injectors to fit most Multi-Port applications they are a great choice for performance upgrades when adding a supercharger or a turbo charger to your system. If you need an injector that will flow around 42 lbs hr @ 3 bar psi with low resistance coil's ohming only 2.4 ohms these fuel injectors will do a great job of delivering the fuel you need.